| Title: |
Highlights of the high-temperature falling particle receiver project: 2012-2016 |
| Authors: |
Ho, Clifford K.; Christian, Joshua M.; Yellowhair, Julius; Jeter, Sheldon; Golob, Matthew; Nguyen, Clayton; Repole, K.; Abdel-Khalik, Said I.; Siegel, Nathan P.; Al-Ansary, Hany; El-Leathy, A.; Gobereit, B. |
| Source: |
Faculty Journal Articles |
| Publisher Information: |
Bucknell Digital Commons |
| Publication Year: |
2017 |
| Collection: |
Bucknell University: Bucknell Digital Commons |
| Subject Terms: |
thermal efficiency; high-temperature falling particle receiver; thermal energy storage; particle flow; Materials Science and Engineering; Mechanical Engineering; Oil; Gas; and Energy; Power and Energy |
| Description: |
A 1 MWt continuously recirculating falling particle receiver has been demonstrated at Sandia National Laboratories. Free-fall and obstructed-flow receiver designs were tested with particle mass flow rates of ~1 – 7 kg/s and average irradiances up to 1,000 suns. Average particle outlet temperatures exceeded 700 °C for the free-fall tests and reached nearly 800 °C for the obstructed-flow tests, with peak particle temperatures exceeding 900 °C. High particle heating rates of ~50 to 200 °C per meter of illuminated drop length were achieved for the free-fall tests with mass flow rates ranging from 1 – 7 kg/s and for average irradiances up to ~ 700 kW/m2. Higher temperatures were achieved at the lower particle mass flow rates due to less shading. The obstructed-flow design yielded particle heating rates over 300 °C per meter of illuminated drop length for mass flow rates of 1 – 3 kg/s for irradiances up to ~1,000 kW/m2. The thermal efficiency was determined to be ~60 – 70% for the free-falling particle tests and up to ~80% for the obstructed-flow tests. Challenges encountered during the tests include particle attrition and particle loss through the aperture, reduced particle mass flow rates at high temperatures due to slot aperture narrowing and increased friction, and deterioration of the obstructed-flow structures due to wear and oxidation. Computational models were validated using the test data and will be used in future studies to design receiver configurations that can increase the thermal efficiency. |
| Document Type: |
text |
| Language: |
unknown |
| Relation: |
https://digitalcommons.bucknell.edu/fac_journ/1597; https://doi.org/10.1063/1.4984370 |
| DOI: |
10.1063/1.4984370 |
| Availability: |
https://digitalcommons.bucknell.edu/fac_journ/1597; https://doi.org/10.1063/1.4984370 |
| Accession Number: |
edsbas.304E9AAA |
| Database: |
BASE |